32mm Drill and Chisel Hammer

Art. No. 00702 543 1 (2186)

32mm Drill and Chisel Hammer

Rugged hammer drill and chisel hammer in the top SDS-plus performance class for drilling diameters up to 32 mm in concrete.

Properties:

Rapid drilling progress and extremely smooth running
The anti-vibration system protects the user’s joints. In addition, the drilling times are shortened due to a high impact power.
Chisel function with 4.2 joule impact strength
Eliminates the need for an additional chipping hammer in many cases.
24-position chipping adjustment
Allows adjustment to different working angles while chiselling, minimising fatigue.

Product information of 32mm Drill and Chisel Hammer

10Kg SDS Max Hammer Chisel

Art. No. 00702 571 1 (2191)

10Kg SDS Max Hammer Chisel

The most impact-resistant 10 kg chisel hammer (16.8 joules) with a long service life for heavy-duty demolition and breakthrough work. Supplied in a robust carrying case with an additional handle, maintenance spray and flat chisel. With SDS-max drive arbor.

Properties:

High output power
With specially hardened tool chuck, optimised dust seal and high-performance motor with high power reserve.
Best in class among 10 kg hammers
Removal rate of approximately 490 kg concrete in 60 minutes
Vibration-damped ergonomic handle
Protects joints and allows safe and low-fatigue work.
Control electronics
Enable continuous adjustment of the impact rate, even under load.
Constant electronics
Ensure a consistent impact rate and impact strength.
Warning light
Signals that the carbon brushes will need to be replaced in approx. 8 working hours.
Carbon brushes with automatic cut-out function
With a particularly long service life.
12-position lockable chiselling position
Allows adjustment to various working angles, thereby protecting the user.
Fully isolated
For maximum electrical safety.
SDS-max automatic mount
Simply start using the tool and it will lock through rotation.
Large in-out slide switch
Easy to operate, even when wearing gloves.

Product information of 10Kg SDS Max Hammer Chisel

Angle Grinder EWS 115

Art. No. 00702 471 0 (2242)

Angle Grinder EWS 115

Powerful 720 W angle grinder with a 115 mm safety guard. Ideal for simple grinding and cutting.

Properties:

  • Min./max. frequency: 50 / 60 Hz
  • Protection class: Protection class II/protective insulation
  • Power input: 720 W
  • Power output: 300 W
  • Max. idle speed: 11000 U/min(rpm)
  • Max. cutting disc diameter.: 115 mm
  • Thread type x spindle-thread diameter: M 14 mm
  • Weight of machine: 1.8 kg
  • Cable length: 4 m

Specifications:

Lightweight and easy to handle
With the smallest grip size in its power range (176 mm) and weighing just 1.8 kg, the angle grinder rests comfortably in your hand, even over longer periods.
Small drive head
Thanks to the small drive head, even difficult-to-reach areas are entirely accessible.
Restart protection
The angle grinder will not restart unintentionally following an interruption to the power supply, significantly reducing the risk of injury.
Longer service life
The specially developed air vents cool the motor down optimally. The carbon brushes with automatic cut-out function protect the motor and ensure a longer service life.
Anti-twist protective hood
Provides a high degree of protection for the user.

 

Angle Grinder 125mm

Art. No. 00702 472 2 – 1000W (2242)

Art. No. 00702 476 2 – 1400W (2243)

Angle Grinder 125mm

Properties:

  • Min./max. nominal voltage: 220 / 240 V/AC
  • Min./max. frequency: 50 / 60 Hz
  • Protection class: Protection class II/protective insulation
  • Power input: 1400 W
  • Power output: 800 W
  • Min./max. idle speed: 2800-11000 U/min(rpm)
  • Max. rotation speed at nominal load: 9250 U/min(rpm)
  • Max. cutting disc diameter.: 125 mm
  • Thread type x spindle-thread diameter: M 14 mm
  • Weight of machine: 2.5 kg
  • Cable length: 4 m

Specifications:

Speed control
• The infinitely adjustable speed control makes the angle grinder the ideal solution for all applications
• The rotation speed can be optimally adapted to the material that is to be machined
Constant electronics
For rapid progress with work as the rotation speed remains constant even under load.
Restart protection
Following an interruption in the power supply, the angle grinder does not restart unintentionally, significantly reducing the risk of injury.
Overload protection and soft start
Increases the service life and operational safety of the machine.
Recoil protection
Mechanical decoupling ensures no recoil if the disk locks. For a high level of protection for the user and rapid continuation of work.
“Q-Nut” quick-clamping nut and quickly adjustable protective cover
The quick-action clamping nut allows rapid and tool-free disc changes at the press of a button. Ideally supplemented by the quick-adjustment protective cover.

Product information of Angle Grinder 125mm

Angle Grinder EWS 24-230

Art. No. 00702 446 10 (2244)

Angle Grinder EWS 24-230

2400 watt angle grinder with quick-clamping nut, for discs with max. 230 mm diameter.

Properties:

Handle can be turned in 90° increments
Optimum working position when grinding or cutting.
Vibration damping on both handles
Less fatigue while working.
Twist-proof protective hood
• The hood cannot be twisted when working and offers the user optimal protection
• Tool-free adjustment for fast, effective work
Recoil protection
If the wheel suddenly blocks, the power supply to the motor is interrupted, considerably reducing the danger of injury.
Overload indicator
To prevent motor damage, an LED comes on if the unit becomes overloaded.
Very slim housing
Makes it easier to work with the angle grinder.
On/Off switch with intelligent electronics
• Restart protection
• Overload protection
• Soft start
Optimised dust-protection concept
• Double labyrinth seals on ball bearings
• Encapsulated switches
• The cooling air is aspirated at the rear vents and blown out at the gear head at the front

Product information of Angle Grinder EWS 24-230

Safety Angle Grinder SWS 230

Art. No. 00702 498 0 (2248)

Safety Angle Grinder SWS 230

Angle grinders of the highest performance class, with unique safety package comprising the run-out brake, restart protection, soft start and patented quick-clamping system. Can be operated completely without tools.

Properties:

Patented electrical run-out brake
Stops the disc completely in less than 3 seconds, reducing the risk of accident by a disc that is still running.
Patented quick-action clamping system
tool-free disc change secures the tool evenly, thereby preventing damage. Can always be detached manually.
The quietest angle grinder in its class thanks to sound insulation (the sound pressure level according to EN50144 is only 86 dB (A)).
Optimum working position when grinding or cutting through:
• Handle can be rotated in 4 positions (in 90° increments, including upwards)
• Additional handle which can be screwed on to the right or left
Electronically-controlled start-up current limitation protects the circuit. The angle grinder accelerates gently and evenly.
Restart protection prevents accidental start-up following a power failure.
Robust motor with a large power reserve for the toughest applications.
Optimal dust protection
Thanks to field banding and special air-guidance concept.
Optimal motor cooling and prevents the switch from becoming dirty.
Large vents upstream of the switch area.
Long safety switch with a power-on inhibitor on the top of the housing and locking option for continuous running.
Protective hood can be turned and removed quickly without tools.
Cut-out carbon brushes prevent motor damage
Easy to service thanks to a carbon brush cover which is quick to remove.
Handle end prevents the unit from slipping while being carried.
The unit can be set down with the disc facing upwards.
4 metre connecting cable

Product information of Safety Angle Grinder SWS 230

Straight Grinder GS 600 – E

Art. No. 00702 500 (2217)

Straight Grinder GS 600 -  E

The high-power model, small and powerful

Properties:

  • Nominal voltage: 230 V/AC
  • Power input: 710 W
  • Power output: 430 W
  • Min./max. idle speed: 13000-34000 U/min(rpm)
  • Collet chuck diameter: 6 mm
  • Clamping neck diameter: 43 mm
  • Weight of machine: 1.7 kg
  • Cable length: 4 m

Specifications:

Compact and lightweight
Thanks to the new lightweight machine design
Comfort and safety
• Safety cut-out
If the tool blocks, the power supply is interrupted immediately
• Restart protection
To prevent accidental restart of the machine
• Thermal overload protection
Cut-out carbon brushes for protecting the motor
Long service life
Insensitive to dust with coated field coil and winding protective grille.

Product information of Straight Grinder GS 600 – E

Eccentric Rotary Sander

Art. No. 00702 129 0 (2263)

Eccentric Rotary Sander

Eccentric sander with 150 mm diameter grinding disc. With two additional stroke stages for coarse and fine sanding. With 6-hole sanding plate.

Properties:

  • Nominal voltage: 230 V/AC
  • Frequency: 50 Hz
  • Protection class: Protection class II/protective insulation
  • Power input: 350 W
  • Power output: 180 W
  • Min./max. idle speed: 4200-9200 U/min(rpm)
  • Min./max. idle orbital rate: 8400-18400 1/min
  • Diameter of sanding plate: 150 mm
  • Oscillating diameter, 1st gear/2nd gear: 2.8 / 6.2 mm
  • Weight of machine: 2.2 kg
  • Cable length: 4 m

Specifications:

Simultaneous rotating and oscillating motion
Results in high removal and thus time savings.
Integrated dust extraction
The device can also be used without the external extraction function if necessary.
Adjusting wheel for adapting the number of rotations and oscillations
Sensitive materials such as veneer or thin layers of paint can be processed without a problem.
2 stroke settings on one machine
• Coarse sanding with 6.2 mm stroke
• Fine sanding with 2.8 mm stroke

Product information of Eccentric Rotary Sander

Biscuit Joiner HVF 710 – S

Art. No. 00702 907 1 (2219)

Biscuit Joiner HVF 710 - S

Powerful, rugged 710 watt machine for reliable, precise connections in hard wood, soft wood, particle board and plastic with wood connection plates. Also suitable for repairing material defects with wood patches.

Properties:

  • Swivelling front plate with scale for mitre connections of 0–90° (continuously variable), with 22.5°, 45° and 67.5° grid patterns
  • Height-adjustable front plate for various material thicknesses with scale of 0–26 mm (0–1 inch) and 3 fast settings on revolver depth stop.
  • Preset milling depth for wood connection plates, sizes 0, 10 and 20, and Duplex (D), Simplex (S) and Max with fine adjustment.
  • Guide carriage, cutter housing, column guide, swivel and height stop made from die cast aluminium.
  • Two-column guide for precision operation
  • Metal gearbox for high stability
  • Integrated dust extractor blows the swarf to the side and away from the area being worked; dust bag connection available.
  • For efficient suction, we recommend the ISS 45-M industrial vacuum cleaner.
  • Attachable plastic plate protects the hand from the cutter.
  • Rubber rings on front plate to prevent slippage on the work surface
  • Easily visible centre and outside marks on floor and front plate.
  • Ergonomic polyamide housing, large bar handle and easily accessible On/Off switch with locking function for continuous operation.
  • Spindle lock
  • Automatic cut-off carbon brushes

Product information of Biscuit Joiner HVF 710 – S

Hand Belt Sander

Art. No. 00702 588 1 (2262)

Hand Belt Sander

Properties:

  • Nominal voltage: 230 V/AC
  • Frequency: 50 Hz
  • Protection class: Protection class II/protective insulation
  • Power input: 750 W
  • Power output: 410 W
  • Min./max. speed: 200-330 m/min
  • Suitable for sandpaper length: 533 mm
  • Suitable for sandpaper width: 75 mm
  • Grinding surface length x grinding surface width: 130 x 75 mm
  • Weight of machine: 3.4 kg
  • Cable length: 4 m

Specifications:

  • For sandpaper with dimensions 533 x 75 mm
  • Removable additional handle, allows sanding right up to the edge.
  • Easy-to-operate quick-action clamping lever for convenient sanding belt changes.
  • Adjusting wheel on On/Off switch for adapting the belt speed to the material.
  • Rugged toothed belt and metal wheels for long service life and low wear.
  • On/Off switch with locking button, easy to operate even while wearing gloves.
  • Simple belt regulation by adjusting the wing screw.
  • Internal extraction possible with dust bag provided.
  • For effective extraction, we recommend the ISS 45-M industrial vacuum cleaner in conjunction with the vacuum adapter for electric tools.

Product information of Hand Belt Sander

1 2 3 5