Orbital Power Sander ESS 115

Art. No. 05707 700 0 (2264)

Orbital Power Sander ESS 115

With universal clamping system for fastening Velcro sandpaper with dimensions of 230 x 115 mm and 10-hole perforation. Also for clamping sandpaper without an adhesion system.

Properties:

Excellent grinding finish
• Low-vibration and long-lasting oscillation system
• Achieves perfect sanding results with almost no sanding grooves
Robust clamping system for versatile use
• Universal clamping system permits the use of sandpaper with and without Velcro.
• Use of abrasives up to 10 mm thick
Integrated dust extraction
• Easy-to-empty dust collection cartridge
• Self-generated dust extraction and washable polyester filter
Clean work
Additional extraction with side extraction channels on the Velcro abrasive pad.
Stronger hold when connecting external vacuum cleaners
Universal extraction connection with fluting

Product information of Orbital Power Sander ESS 115

Electric Planer EH4

Art. No. 00702 816 1 (2267)

Electric Planer  EH4

High-performance planer with extra-large chip ducts and chip bag for fault-free, clean operation.

Properties:
High-performance 1050 W motor
Low-fatigue low-effort planing, even with hard woods.
Large-diameter blade shaft
Perfect surface finishes thanks to high circumferential speed.
High-volume chipping bag with fill level display
Eliminates almost all cleaning in the surrounding area.
Chips can be ejected to the right or left (adjustable)
Greatest possible level of flexibility when working.

Product information of Electric Planer EH4

Depth Cutting Saw

Art. No. 00702 154 1 (2233)

Depth Cutting Saw

Properties:

  • Nominal voltage: 230 V/AC
  • Frequency: 50 Hz
  • Power input: 1350 W
  • Power output: 800 W
  • Min./max. idle speed: 5000 rpm
  • Saw blade hole: 30 mm
  • Saw-blade: 165 mm
  • Min./max. mitre angle: 0-55 Degree
  • Max. cutting depth at 90 degrees: 62 mm
  • Max. cutting depth at 45 degrees: 49 mm
  • Weight of machine: 6 kg
  • Cable length: 4 m

Router OF 1850 – E

Art. No. 00702 760

Router OF 1850 - E

Properties:

  • Nominal voltage: 230 V/AC
  • Frequency: 50 Hz
  • Protection class: Protection class II/protective insulation
  • Power input: 1100 W
  • Power output: 600 W
  • Min./max. idle speed: 8000-24000 U/min(rpm)
  • Stroke of plunge router: 55 mm
  • Milling cutter diameter: 30 mm
  • Groove milling cutter diameter: 36 mm
  • Weight of machine: 3.1 kg
  • Cable length: 4 m

Specifications:

Electronic knurled wheel for speed pre-selection with different materials and milling cutters
Constant electronics for consistent rotation speed
For a consistently good milling pattern in wood, plastic and aluminium
Soft start
Reduces vibrations and protects motor, gearbox and user
Permanently reliable machine hold
• Milling depth lock on left handle
• On/off switch with power-on inhibitor and lock on right handle
Rubberised handles and low centre of gravity
2 milling basket columns in high-quality die cast aluminium housing
Precise and careful plunging
Parallel stop with fine adjustment in 0.1 mm range and vacuum adapter
Factory-adjusted guide sleeve system
For precise template milling
Milling depth adjustment
Using rough setting and fine adjustment in 0.1 mm increments
Replaceable plastic sliding surface on milling basket protects workpieces
Precision collet chuck and spindle lock
Precise work and fast cutter replacement
Patented dust extraction system
The left milling basket column can be rotated by 360°
Supplied in plastic case

Product information of Router OF 1850 – E

Polishing Machine PM 200 – E

Art. No. 00702 453 0 (2251)

Polishing Machine PM 200 -  E

Powerful polishing and burnishing machine in a compact and handy design.

Properties:

Two-in-one, for painted and metal surfaces
With the corresponding accessories, the PM 200-E replaces a burnishing machine.
Extremely handy and lightweight.
Minimal force needed when working side surfaces.
Double transmission reduction.
Enables very low speed for careful, targeted polishing.
Soft start and restart protection (after a power cut)
Increased user safety.

Product information of Polishing Machine PM 200 – E

 

Electronic Hot Glue Gun

Art. No. 00702 623 1

Electronic Hot Glue Gun

Especially powerful glue gun, ideal for all installation, repair, fixing and decoration work.

Properties:

Adjustable operating temperature
Melting point and processing temperature can vary from glue to glue. The HKP 220 allows the heating output to be matched and set according to the particular glue.
Exact dosing
The trigger can be set via a mechanical stroke limit so that exactly the same amount of glue is applied on each actuation.
Low-fatigue work
The long trigger promises ergonomically perfect handling. The stroke limit described above can also be used to set the distance from the trigger to the handle to suit the size of your own hand.

Product information of Electronic Hot Glue Gun

 

Portable Band Saw PBS120

Art. No. 00701 320 0 (2239)

Portable Band Saw PBS120

Portable metal bandsaw with automatic sawing frame lowering. Ideal for use on construction sites.

Properties:

Safe and simple
Precise cutting results can be achieved with incredible ease owing to automatic lowering of the sawing frame with 4 adjustable lowering speeds, as the correct contact pressure can be applied every time to prevent the sawing belt from deviating.
Rapid sawing progress
60% faster cutting thanks to reverse direction of rotating of the sawing belt in comparison to clockwise rotating bandsaws.
Suitable for mobile use
Tool can be carried easily owing to ergonomic handle and compact and lightweight construction.
Constant and adaptable cutting speed
Powerful 1,300-watt motor with constant electronics facilitates an optimal cutting speed matched to the work piece that can be selected according to the size and temperature sensitivity of the materials.
Rapid setting of popular standard mitre joints
Fixed angle stops 0°, 45°, 60°
Environmentally and user friendly
Dry cutting

 

DSS 1/2” H Impact Wrench

Art. No. 00703 736 0

DSS 1.2” H Impact Wrench

Properties:

  • Type description: DSS 1/2 Zoll H
  • Tool holding device: 1/2-inch external square
  • Min. working torque: 70 Nm
  • Max. working torque: 470 Nm
  • Max. releasing torque: 569 Nm
  • Sound-pressure level: 92 dB
  • Vibration: 3.78 m/s²
  • Working pressure: 6.3 bar
  • Weight of machine: 2.3 kg
  • Min. hose inner diameter: 8 mm
  • Air consumption: 102 l/min
  • Connection thread: 1/4 inch
  • Length x width x height: 195 x 64 x 202 mm

Specifications:

Recommended maximum bolt size: M15
Robust and well-balanced device in an aluminium housing
Long service life and optimum centre of gravity
Rubberised and ergonomically designed handle, user-friendly right/left conversion and easy-to-control button
• The handle does not cool down during work
• Extremely handy and user-friendly device
Tightening torque adjustable 4 stages
• Right to tighten
1. Stage 1: approx. 70 Nm Stage 2: approx. 120 Nm Stage 3: approx. 280 Nm Stage 4: approx. 420 Nm
• Left to release
max. 569 Nm
High-quality pin impact mechanism in oil bath with 6-disc motor
• Longer service life thanks to continual lubrication
• Almost vibration-free

Product information of DSS 1/2” H Impact Wrench

1 2 3 4 5